Color Box Printing and Packaging Commonly Used Terms
Classification of printing plates
- ps plate: suitable for colorful or monochrome fine printing, applicable machines for lithographic presses. The general stay version can be used for continuous printing, the quality of printing is appropriate fine, nearly perfect. 2.
- resin plate: such as tattoo machine, disc machine for general a small number of tattoos, store cards, invitations, stickers can be.
- zinc plate: such as hand stabbing machine, disc machine, hot stamping machine, especially used in hot stamping, embossing (using the version), excellent quality, and lithographic printing with this plate (for the earliest domestic lithographic printing plate).
- paper plate: applicable to fast printing machine, etc., this version of the paper plate, so it can not be saved, its cost is also relatively cheap.
- screen: for screen printing machine, this version is suitable for printing some more special materials, such as PVC, clothes, etc.. Aluminum plate: applicable to lithographic printing machine, but due to the print resistance is not high and stay plate bad ratio is very high, so the use of less. Color box printing packaging commonly used printing terms
- white/leakage: printing paper is mostly white, printing or plate making, the articulation of the color is not close, exposing the white paper base color. (2) white: the photographic plate making process in the era of screen printing. In order to compensate for the lack of Internet pictures of dark bits of light sensitivity, you can move away from the original bright light once or put a piece of paper to make up for the exposure, or direct use of flash lamps, flashing white light to increase the original deep bit of the network, so that the image is softened.
- burst fat: “overeating” of course will be “fat”, film silver grain sense more, the light will also expand the ground. Craft set plate more in the photographic film plus separation of bright thick film exposure and fertilization. 4.
- fill the leakage of white (Colortrapping): color separation plate intentionally make the color account for the expansion of the bit burst fat, to reduce the impact of overprinting.
- field: refers to the area of the color block without dots, usually refers to the full plate. 6.
- anti-white: text or lines printed in negative, exposed to the paper white.
- hit the net: AM network color separation process, the dot angle distribution error, or each net angle interval is less than 25 °, tortoise on the initial clear
- fly net: lens plate hanging net process, normal exposure after removing the hanging net, compensation for short exposure time to increase contrast.
- dog’s teeth: the dog’s “teeth” are concave and convex interlaced. Pictures lack of pixels, expand the edge of the “dog’s teeth”. 10.
- Rose Dot: A deer-like mesh pattern. Poorly called matting, or worse, tortoise pattern. 11.
- Qi Tou: the layout of the instructions to the first word as a baseline. Extended to the collation, binding, refers to the head of the plate position as a benchmark.
- loose end: a kind of text layout. Only seek the same word spacing, do not seek the end of the line of text regular.
- mask: is the craft of color separation when the taboo ornamental piece, can be used in the film sun system or red film cut, can be used as a retreat or repair color.
- blue version: not playing “basketball”, not RGB B (blue), but CMYK C (cyan) version. Binding
- Bleeding: printing and binding process requires the page of the ground color or picture, must be across the cutting line 3mm, known as bleeding. 2.
- Fly edge: “fly”, cut, remove the meaning. Flying edge refers to the removal of bleeding edge, is a bookbinding term. 3.
- slanting: deformation, cutting crooked, right-angled into a diamond book, mostly by the uneven pressure of the paper gate or the paper grid is not correct.
- Polishing: The surface is lubricated by calendaring rollers, which is a surface treatment process.
- backhand fold: the folding of a Japanese book folding machine; the fourth fold of the 32nd version of the folding method must be folded backhand.
- genuine: book version of the first code address page called genuine, the second code address page called the reverse version, positive and negative version called a group, a post or a frame.
- paper gate: not the door to close the paper, is the machine that cuts paper.
- riding nails: a method of bookbinding, action such as across the back of a horse. Thin book (6 posts or less) set up, across the iron frame to wear pressure wire nails.
- pig intestines roll: folding a method of book stickers, actions such as rolled intestines, with 3 on the shuttle 2 under the shuttle can be folded 32 versions.
- Wind Blow (sound “moon”): a method of folding book stickers. The book is folded and pulled apart like a screen. 11.
- reverse cover: a method of hand-binding on the cover, first on the back cover side of the glue to set a good position, and then on the spine of the cover side of the glue, and then do a “reverse” cover movements.
- hairy book: not the book hair, refers to the lock line and not on the cover cut blank book. 13.
- Tuktuk head cloth: hardcover books spine up and down a section of the cloth connecting the leather case. The role of robust and beautiful.
- fire printing: hardcover cover of a processing action such as hot stamping, high humidity.
Leave a Reply