Color box printing process of laminating process
Color Box Printing Lamination is a kind of process used in the manufacture of color box printing nowadays, that is to say, transparent plastic film is laminated to the appearance of color box through hot pressing. The color box after lamination has many advantages, such as waterproof, anti-fouling, no discoloration and increased luster.
So what is the process of color box lamination? Here is a brief introduction.
1, turn on the machine power, hit the air compressor open valve inflatable. Press the alarm, open the host, equipment operation.
2, turn on the electric switch early heating, temperature regulation at about 100 degrees. According to the thickness of the paper or the material can be adjusted temperature, ordinary control between 90-110 degrees.
3, the product to be coated in the center placed on the top to the table, adjust the two sides of the block gauge to the appropriate position.
4, adjust the fly and suction nozzle, adjust the pressure of the two paper feed end of the pressure wheel, the pressure to adhere to the differences, to prevent the paper from going off.
5, according to the width of the paper, adjust the size of the lap, lap ordinary in 1CM or so.
6, adjusting the cutter disk of the paper cutter, the paper receiving belt and the paper receiving table of the blocking gauge, the blocking plate from the paper about 1CM position.
7, the film according to the direction of the paper through the guide roller, wrinkle roller, adjusting roller into the press part. And adjust the position of the film and the position of the paper bonded to adhere to the same.
8, according to the thickness of the paper to adjust the pressure of the composite steel rod, ordinary control between 10 Pa – 15 Pa.
9, after the adjustment of equipment, with defective products based on samples and manufacturing orders to stop the test machine after the signing of the sample consumption.
Leave a Reply