Color box printing different customers have hundreds of boxes, how to plan to do anti-mixing logo is good!

Color box printing different customers have hundreds of boxes, how to plan to do anti-mixing logo is good!

Printing house to gather enthusiastic users reply for our reference:

One: the paste to do on the different colors of the color scale, printing code table after the big head pen on the side of the paper to draw a symbol line difference.

Second: I do not have that variety. I just symbolize on the paste. Or you can try color block bleed. The color block bleed is the same as the color block bleed, plus the item number. Or you can try a barcode bleed 。。。。 Can you read them in piles. This has not been tried. Look at your die-cutting.

Third: we are here in the buried mouth bit to add a string of codes, so that it is simple to distinguish between the color card on the edge of the black key is to see if the customer acceptance

Fourth: some of our customers will add their own bar code adjacent to the color block, they are also afraid of mixing the models. It is best to add a code on the dust wing at the bottom of the box, this is also beneficial to customers, especially the number of models particularly large number of customers.

Five: paste the side to do different sizes of the number of colors of the marking line

Six: paste with the product name and number and other information can be differentiated

Seven: each product with only the number that before printing: such as printing piece number, product number, etc., to correspond to the number directly do do printing plate. Products through the identification card management, preferably with bar code management, and then use the bar code collector to identify the inventory and out of stock.

Eight: pre-press can do basically on the upstairs centralized approach, in fact, anti-mixed materials is still the main thing to look at the cut products part of the work approach and execution of the

Nine: in the sticky bit with marked colorful figures, each process to do a clearing and then continue the next one.

Ten: sticky mouth above the color and number marking has been a very common solution, but the question is whether the production can be done to clear the field. And product quality control will not be confused.

Eleven: in the color box of the wing child bit can also be added to the goods number or the bottom of the bottom of the key place can also be!

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *