Color box manufacturers talk about how to prevent mold factory gift boxes

How to prevent mold in factory gift boxes? Factory gift box mold is what causes it? In order to prevent large-scale moldy gift boxes, the most important thing is to do a good job in the factory to prevent moldy operations, here we recommend a professional gift box mold plan.

First, the cause of mold

Gift box mold is mainly caused by the following reasons of mold:

1, the warehouse humidity overruns, the air humidity leads to color box moisture;

2, laminating paper with powder glue (animal glue also called jelly glue), this kind of glue inside has a lot of starch, protein, these are the source of abundant nutrients needed by the mold raw, for the mold to bring the growth conditions, so lead to the box moldy risk;

3. The humidity of the paper material of the gift box itself is more than 12% of the risk of mold; Second, the specific mold treatment process is as follows: 1, the paper material should adhere to the clean, sanitary. Workshop turnover box material should adhere to the clean and tidy, advocating that the day is not in the use of the original material of the turnover box above the cloth or plastic film to cover, blocking the dust, the production of semi-products should not be placed on the ground, with pallets or material racks for isolation of placement. 2, control paper, cardboard boxes and other packaging materials, humidity below 12 degrees, long time no use of the material, with plastic film coiled to cover the dust moisture, (customs inspection standards at 12% below, more than 12% on the risk of mold). 3, glue, especially environmentally friendly animal glue, must be used before the use of animal glue inside the increase of 2% -5% of the AEM5700-L glue mold inhibitor, to deal with the moldy gift boxes due to the laminating glue. 4, in the gift box packaging carton placed in the appropriate amount of biochemical desiccant, packaging products in the box and the outer box should adhere to the clean and tidy, biochemical desiccant can not only adsorb moisture self-generated weight 3 times. Or put a few pieces of anti-mold tablets. Can trigger the anti-mold component in a relatively confined space to kill mold and press the growth of mold, so as to achieve the role of anti-mold. Addendum: gift box production workshop washroom door should adhere to the clean, do not have seepage of water, washroom around the goods can not be piled up, to prevent its products from moisture mold phenomenon. Such as: the concentration of agent in water = 5% ÷ 80%, resulting in 6.25%, the practice should be slightly greater than this concentration. The above is the gift box mold plan, I hope we can make good use of on.