Packaging printing process of die-cutting and creasing is whatfonmoo
What we usually call die-cutting and creasing process is the combination of die-cutting and creasing knife in the same template, die-cutting and creasing process on the die-cutting machine at the same time, referred to as die-cutting.
The principle and characteristics of the die-cutting and creasing process
The principle of die-cutting and creasing process is to take specific paper and materials in accordance with the planning requirements, box printing factory in the machine equipped with steel knife template for processing and manufacturing, and the paper or material punching and cutting into the required box shape and present the special effect on the way, such process technology we call die-cutting.
And the specific paper and material in accordance with the planning requirements, in the machine equipped with steel line template processing manufacturing, paper or material surface under pressure printed with deep or shallow traces of steel lines. Then by hand or machine folding, paper and materials are very easy to bend and form a certain way of structure or shape, so the process technology we call creasing.
Usually die-cutting and creasing process is the combination of die-cutting knife and creasing knife in the same template, die-cutting and creasing process on the die-cutting machine at the same time. However, we also refer to it as die cutting or die creasing.
And it can be operated as a separate process or the two processes can be combined in the same machine into a single process to complete the die-cutting version of both steel knife and steel wire, which are not in conflict with each other.
The die-cutting and creasing process has changed the single straight line or flat way in packaging printing, and allows a variety of packaging printing to three-dimensional and curved presentation, creating a variety of shapes and forms are more beautiful and exquisite, full of conceptual wisdom of packaging printing products.
The use of die-cutting in the creasing process
In the field of paper packaging printing, die-cutting and creasing process is extremely widely used, such as common packaging boxes, shaped tags, hollow labels, folding DM advertising leaflets, self-adhesive printing, leather products, etc. are required in the post-printing process using die-cutting process.
Common are three-dimensional packaging boxes and rectangular, cubic, conical body, polygonal structure, different shapes of flat works such as round, oval, plum-shaped, polygonal, etc., as well as other in the booklet appeared in combination with a page planning to show the special conception of graphics.
Die-cutting type roller die-cutting
A roller printing machine is usually equipped with a roll cutter, and although there are limitations to the types of dies it can use and the paper it can cut, this is obviously very effective for printed materials that require a lot of die cutting.
Flat sheet die-cutting
But the flat sheet material can only be processed on the installation channel die-cutting equipment, because the need for many manual operations, lower production power, but can be more rich and diverse die-cutting process.
Typical examples of convergence die-cutting are: A round hole B hand-tear line C cardboard box D skylight E shaped F special folding machine, because of the widespread use of folding process, the use of professional folding machine is the general trend.
Than the current folding machine, can supply strong solutions to optimize the production process, relative to the hand creasing folding, folding machine both in terms of quality, power have incomparable advantages.